- AccessoriesManual, drain, electric cable and fitting
- Power supplyMono 230V~/50 Hz
- CapacityFrom 5 m³ to 20 m³
- GasR 32
- ExchangerTitanium
- ModeHot/Cold
- Description
- Technical specifications
- Documents
WARMPOOL, DESIGNED AND DEVELOPED IN FRANCE
WARMPOOL 's CUBE range has been designed with one thing in mind: to help you enjoy your pool for longer, season after season. CUBE heat pumps are designed and developed in France with a daily commitment to quality and durability. For WARMPOOL, ecology isn't just a marketing ploy: the refrigerant gas used in its heat pumps is an environmentally-friendly, high-performance gas known as R32. WARMPOOL is also a member of the DEEE PRO label, a strong commitment to environmental protection.
The CUBE range
WARMPOOL 's CUBE range comprises two different power ratings, from 15m3 to 20m3. This heat pump is equipped with a Bluetooth controller, enabling precise adjustment of your water temperature from 5°C to 40°C. Thanks to the different modes available (hot or cold), your pool will always be at the desired temperature.
The ideal heat pump for your pond
|
Heat pump model |
Basin capacity*** | Recommended water flow |
| CUBE 2.5 | Up to 15 m3 | 1.1 m3/H |
| CUBE 3.5 | Up to 20 m3 | 1.5 m3/H |
*** Study for a covered pool over a heating period from early May to late September, based on a national average temperature. To be confirmed by a professional.
Titanium heat exchanger operating principle
This heat exchanger invented by WARMPAC optimizes contact between the water and the heating coil.
Power and efficiency of the CUBE heat pump
|
Heat pump model |
Consumption | COP | Consumption** (%) | COP | Enclosure type | Fan direction | Fan speed (PRM) | Sound power level at 1m (dB(A)) |
| CUBE 2.5 | 0.6 kW | 4.2 | 0.56 kW | 3.3 | Metal | Horizontal | 700 | 46 |
| CUBE 3.5 | 0.82 kW | 4.3 | 0.78 kW | 3.4 | Metal | Horizontal | 700 | 46 |
* Test carried out at 27°C air temperature, with the same difference in temperature and water flow rate obtained at 15°C.
** Test carried out at 15°C air temperature, with water inlet at 26°C and water outlet at 28°C to define water flow rate, heating capacity and consumption, in accordance with FPP standards.
Connecting the WARMPOOL CUBE heat pump
|
Heat pump model |
Hydraulic connection |
Power supply |
| CUBE 2.5 | PVC 32-38 mm | Mono 230V - /50 Hz |
| CUBE 3.5 | PVC 32-38 mm | Mono 230V - /50 Hz |
Dimensions of WARMPOOL CUBE heat pumps
|
Heat pump model |
PAC dimensions in mm |
Carton size in mm |
| CUBE 2.5 | 420/370/420 | 435/410/430 |
| CUBE 3.5 | 420/370/420 | 435/410/430 |
CUBE is guaranteed for two years on all parts. The warranty applies only to normal use and/or installation of the unit in accordance with the manufacturer's instructions.WARMPOOL CUBE HEAT PUMP WARRANTIES
Any improper use, modification or installation not intended by the manufacturer will invalidate this warranty. Under no circumstances should a heat pump be installed or stored horizontally, even before installation. This would cause serious damage to the heat pump.